The CM+ is the ideal control unit for conventional fire detection systems from 1 to 300 detectors.
- 3, 6 or 10 zones
- User-friendly installation
- Simple operation
- Well-arranged indications
- According to EN54-2/4
- Modern and compact look
- 2A power supply with high performance
- Full option design
- Room for 7Ah batteries
- Option for additional control panels
Clever hardware and software have produced a control unit with unlimited possibilities in a compact housing.
The control unit operates with conventional detectors and hand-held fire alarm detectors via 2-wire zones. It is possible to connect two additional control panels remotely.
Optional module
8 extra relays in addition to the 3 standard output ports and the 3 standard relays
An 11th protected loop enables reading external control elements e.g., a triangular key switch for the fire brigade.
The control unit has a standard programmation, in option the control unit is quickly and completely configured using the Cmplus.exe program running on a PC. A laptop computer can be plugged in during maintenance or when making the installation operational.
Via the laptop all internal measurement data can be retrieved such as the current consumption in the loops or the current consumption of the external users.
Simple settings (such as delay periods) can be set via the control panel.
The following EN54-2 options are standard available:
- 7.8 Driving & safeguarding the sirens
- 7.9 Driving & safeguarding the alarm transmitting detector
- 7.10 Driving & safeguarding the fire prevention means (e.g., door magnets)
- 7.11 Delay periods for the drives
- 7.13 Alarm counter
- 8.4 Signalization in case of power supply failure of the mains or of the battery
- 8.9 Driving & safeguarding the failure transmitting detector
- 10 Testing position
- 11 Standardized I/O interface (remote driving of the control panel)
HOUSING
- Dimensions: 340 x 266 x 93 mm(w x h x d)
- Colour: light grey (RAL7004)
- Material: ABS/V0
- Mounting: 4 holes of Ø 5mm
- Cable input: Centrally located input zone at the back of the housing. The housing creates a recess of 21mm between the control unit and the wall, allowing the cables to come from the top or from the bottom, to disappear behind the control unit and to connect the cables to the control unit via the central cable input. You do not need cable input swivels
- IP rating: IP30
- Temperature: -5ºC … +40ºC
- Maximum humidity: 0-95% (non-condensing)
POWER SUPPLY
- Primary: 230VAC, fuse 1AT, capacity: 7W to 60W
- Battery:24VDC hermetic lead battery (2x 12V in series)
- Capacity: 1.2 Ah to 7Ah
- Charge voltage: Depending on the temperature, regulated for the maximum lifespan of the batteries (between 26V and 28V)
- Charge current:Max. 0.86A (internally limited)
CONNECTION OF THE EXTERNAL CONTROL PANELS
- Cable type & length: XVB 3x1.5 150m maximum
DRIVING THE SIRENS
- Amount: 2 circles
- Maximum current per circle: 0.7A
- End-loop resistance: 1K/1W
- Electronically fused and safeguarded against short-circuit & line rupture
POWER SUPPLY OF THE OUTPUT PORTS
- Voltage: 18.5V - 28V
- Maximum current: 0.5A electronically fused
- Current consumption (idle) for autonomy calculation:
- For the control unit: 6mA
- For the loops: 5mA per loop
- For the relays continuously ON: 10mA
- For additional control panel: 3.5mA
- Fire detection zones:
- Amount: 3, 6 of 10
- End-loop resistance: 4K7
- Alarm resistance: 1K/1W
- Short-circuit limit: 140mA
- Compatible with low-consumption repeat-lamps AR/HHL (10mA per repeat-lamp)
- Current consumption (idle) for autonomy calculation:
RELAY
- 3 relays of : 1 switch contact 1A / 30V
- Relay circuit board : 8 relays 1A (option 1)
- Relay circuit board : 4 relays 1A + 4 relays 5A (option 2)
SWITCH LOOP
- Protected switch loop: with resistance identification for reading 4 external switches (e.g. for external ‘reset’ and ‘silence’)
| Artikelcode | Artikelnaam |
|---|---|
| 11103253 | CM+ met 3 lussen |
| 11103256 | CM+ met 6 lussen |
| 11103260 | CM+ met 10 lussen |
| Opties | |
| 11103240 | Uitbreiding 8 relais |
| 11103241 |
Uitbreiding 4 + 4 relais |
